Ti Milling Discs

Starbond Ti5 Disc

Starbond Ti5 Disc

Milling disc made of grade 5 "ELI" (Extra Low Interstitial) titanium alloy TiAl6V4.
Compliant with ISO 5832-2 and ASTM F136

Advantages for users:
  • Ideal mechanical properties
  • Excellent bonding with ceramics for titanium
  • Biocompatible
  • Extremly corrosion resistant
  • Particularly patient friendly due to low thermal conductivity
  • Perfect suitable for implant-supported restorations, superstructures and bars

Composition in percent by mass:

Ti 89.4%
Al 6.2%
V 4%
N,C,H,Fe,O <0.4%

Technical properties:

Proof stress (Rp 0.2) 837MPa
Ultimate tensile strength 921MPa
Elongation 15%
Vickers hardness 330HV5/30
Density 4.4g/cm³
Melting point 1650°C
CTE (20-600°C) 10.3 x 10⁻⁶K⁻¹
Type (DIN EN ISO 22674) 4

Sizes:

08mm x 98.3mm with edge Ref. 136508
10mm x 98.3mm with edge Ref. 136510
12mm x 98.3mm with edge Ref. 136512
13,5mm x 98.3mm with edge Ref. 136513
15mm x 98.3mm with edge Ref. 136515
16mm x 98.3mm with edge Ref. 136516
18mm x 98.3mm with edge Ref. 136518
20mm x 98.3mm with edge Ref. 136520
25mm x 98.3mm with edge Ref. 136525
30mm x 98.3mm with edge Ref. 136530
08mm x 99.5mm without edge Ref. 136008
10mm x 99.5mm without edge Ref. 136010
12mm x 99.5mm without edge Ref. 136012
14mm x 99.5mm without edge Ref. 136014
15mm x 99.5mm without edge Ref. 136015
16mm x 99.5mm without edge Ref. 136016
18mm x 99.5mm without edge Ref. 136018
25mm x 99.5mm without edge Ref. 136025
30mm x 99.5mm without edge Ref. 136030