Ti Milling Discs

Starbond Ti4 Disc

Starbond Ti4 Disc

Milling disc made of pure titanium with increased oxygen Content (Grade 4)
Compliant with ISO 5832-2 and ASTM F67

Advantages for users:
  • Ideal for example for the production superstructures, bars and partial dentures
  • Perfect milling results
  • Excellent bonding with ceramics for titanium
  • Biocompatible
  • Extremley corrosion resistant
  • Particularly patient friendly due to low thermal conductivity

Composition in percent by mass:

Ti >99%
N,C,H,Fe,O <1%

Technichal properties:

Proof stress (Rp 0.2) 504MPa
Ultimate tensile strength 599MPa
Elongation 23.5%
Vickers hardness >200HV5/30
Density 4.5g/cm³
Melting point 1660°C
CTE (20-600°C) 9.7 x 10⁻⁶K⁻¹
Type (DIN EN ISO 22674) 4

Sizes:

08mm x 98.3mm with edge Ref. 135508
10mm x 98.3mm with edge Ref. 135510
12mm x 98.3mm with edge Ref. 135512
13.5mm x 98.3mm with edge Ref. 135513
15mm x 98.3mm with edge Ref. 135515
16mm x 98.3mm with edge Ref. 135516
18mm x 98.3mm with edge Ref. 135518
25mm x 98.3mm with edge Ref. 135525
30mm x 98.3mm with edge Ref. 135530
08mm x 99.5mm without edge Ref. 135008
10mm x 99.5mm without edge Ref. 135010
12mm x 99.5mm without edge Ref. 135012
13.5mm x 99.5mm without edge Ref. 135013
15mm x 99.5mm without edge Ref. 135015
16mm x 99.5mm without edge Ref. 135016
18mm x 99.5mm without edge Ref. 135018
25mm x 99.5mm without edge Ref. 135025
30mm x 99.5mm without edge Ref. 135030