CoCr Milling Discs

MoguCera C Disc

CoCrMo milling disc with excellent properties for the manufacture of crowns, bridges, frameworks, telescopes, bars, attachments, implant supported superstructures and abutments. MoguCera C Disc is based on a non-precious ceramic alloy already used in the conventional casting technology. Free of nickel, beryllium, lead und cadmium. Type 4 pursuant to DIN EN ISO 22674 with a very wide range of indications.

Advantages for users:

  • Medium hardness of 288 HV 10
  • Excellent metal-ceramic Bonding
  • Biocompatible
  • Easy to work with and very to polish
  • Laser weldable
  • Suitable for dry and wet milling

Composition in percent by mass:

Co 65%
Cr 28%
Mo 5%
C,Si,Nb,Mn,Fe <1%

Technical properties:

Proof stress (Rp 0.2) 413MPa
Ultimate tensile strength 597MPa
Elongation 12%
Elastic modulus 206GPa
Vickers hardness 288HV10
Density 8.3g/cm³
CTE (20-500°C) 14.5 x 10⁻⁶K⁻¹
CTE (20-600°C) 14.8 x 10⁻⁶K⁻¹
Laser weldable Yes
Type (DIN EN ISO 22674) 4

Sizes:

08mm x 98.3mm with edge Ref. 138108
10mm x 98.3mm with edge Ref. 138110
12mm x 98.3mm with edge Ref. 138112
13.5mm x 98.3mm with edge Ref. 138113
15mm x 98.3mm with edge Ref. 138115
16mm x 98.3mm with edge Ref. 138116
18mm x 98.3mm with edge Ref. 138118
20mm x 98.3mm with edge Ref. 138120
25mm x 98.3mm with edge Ref. 138125
30mm x 98.3mm with edge Ref. 138130
08mm x 99.5mm without edge Ref. 138008
10mm x 99.5mm without edge Ref. 138010
12mm x 99.5mm without edge Ref. 138012
14mm x 99.5mm without edge Ref. 138013
15mm x 99.5mm without edge Ref. 138015
16mm x 99.5mm without edge Ref. 138016
18mm x 99.5mm without edge Ref. 138018
20mm x 99.5mm without edge Ref. 138020
25mm x 99.5mm without edge Ref. 138025
30mm x 99.5mm without edge Ref. 138030