CoCr Powder
Modelstar S Powder
Modelstar S Powder is based on the Modelstar S partial denture alloy. This guarantees the successful production of dentures with a well-proven dental material.
- Compliant with DIN EN ISO 5832-4 and ASTM F75
Modelstar S Powder 16
- Grain size of the powder: 0-16µm
- Suitable for processing in the systems:
PXS Dental* and PXM Dental*, DMP Dental 100* and ProX DMP 200*
Modelstar S Powder 65
- Grain size of the powder: <65µm
- Suitable for processing in the systems:
On request
Composition in percent by mass:
| Co |
61.5% |
| Cr |
28.5% |
| Mo |
6% |
| C,Fe,Mn,Si |
<1% |
Technical properties**:
| Proof stress (Rp 0.2) |
560MPa |
| Ultimate tensile strength |
960MPa |
| Elongation |
20% |
| Vickers hardness |
340 HV 10 |
| Density |
8.4g/cm³ |
| Melting range |
1490-1540°C |
| Laser weldable |
Yes |
| Type (DIN EN ISO 22674) |
5 |
Trade unit:
| Modelstar S Powder 16 |
5000g |
Ref. 132716 |
| Modelstar S Powder 65 |
5000g |
Ref. 132165 |
*PXS Dental and PXM Dental are registered trademarks of the company PHENIX Systems // *DMP Dental 100 and ProX DMP 200 Dental are registered trademarks of 3D Systems Corp.
** Standard values; dependent on specific machine settings
HOTLINE: 
